lx-i Kabelschneider - Service

Unlocking

Enshure that the blades match the Application

You can unlock the moving blade of the S-50 in any position. Prior to cutting, check that the blades match the application of the desired cut.

If a cable is inserted misleadingly or if the blades don't cut the cable you can abort the cut at any time. To abort a cut you have to move the turning blade backward.

At first open the lever until blocking position

Additional press down the holding ratchet.

Occasional inner stress can provide resistance and cause the holding ratchet to block. In that case losen the ratchet with reasonable use of a soft hammer.

The moving blade is free and the cut can be exited. By rotating the moving blade contrary to working direction the cable can be removed.

Please change damaged blades immediately.

Page last modified on February 05, 2009, at 05:40 PM

Home Cable Cutter Crimp Tools Service Order
Cable Cutter K-3 K-4 KS-34 KS-42 S KS-52 KS-62 KS-62 hd KS-80 DT-75 Universal Cutter S-50 S-50 Blades S-50 ACSR Cable Shers C-1 C-2 C-3 C-4 Trolley wires FDS-10 FDS-15 Flat band FS-40 Crimp Tools © Lx-i.com 2009	Unlocking You can unlock the moving blade of the S-50 in any position. Prior to cutting, check that the blades match the application of the desired cut. If a cable is inserted misleadingly or if the blades don't cut the cable you can abort the cut at any time. To abort a cut you have to move the turning blade backward. At first open the lever until blocking position Additional press down the holding ratchet. Occasional inner stress can provide resistance and cause the holding ratchet to block. In that case losen the ratchet with reasonable use of a soft hammer. The moving blade is free and the cut can be exited. By rotating the moving blade contrary to working direction the cable can be removed. Please change damaged blades immediately. Page last modified on February 05, 2009, at 05:40 PM
Impressum AGB Copyright Lx-i.com® 2009